Based on your local ip address, pick the correct IP address from the list above and click Admin. You should be redirected to your router admin interface.
Thực hiện theo các hướng dẫn sau để đăng nhập vào ClearAccess Router
.
Kết nối cáp Router với máy tính xách tay hoặc máy tính của bạn. Hoặc sử dụng mạng không dây của bạn.
Lời khuyên - Tốt nhất là sử dụng kết nối có dây trong khi thiết lập Router ClearAccess. Điều này tránh nguy cơ đột nhiên bị đăng xuất khi lưu các thay đổi của bạn.
Mở trình duyệt web bạn chọn và nhập địa chỉ IP của Router ClearAccess. Bạn có thể tìm thấy địa chỉ IP ở mặt sau của bộ định tuyến của bạn.
Bây giờ hãy nhập tên người dùng và mật khẩu mặc định của Router bằng cách truy cập trang quản trị. Nếu bạn không có tên người dùng và mật khẩu, bạn có thể thử một trong những mật khẩu mặc định cho Router ClearAccess.
Nếu bạn không thể đăng nhập vào bộ định tuyến của bạn, thì có lẽ bạn đang nhập sai tên người dùng hoặc mật khẩu. Hãy nhớ ghi chú cả hai sau khi bạn thay đổi chúng.
1. What is the username and password of ClearAccess routers?
The majority of the ClearAccess routers have a default username of admin and a default password of admin2. What is the default password of a ClearAccess router?
The majority of the ClearAccess routers have the default password admin3. What is the default IP of a ClearAccess router?
The majority of the ClearAccess routers use 192.168.1.1 as the default IP address4. How to log in to a ClearAccess router?
First, type the router’s IP address in your browser address bar, Then, enter your router username and password, and then click OK or LOGIN.5. How to troubleshoot a ClearAccess router?
First check if the WAN cable is connected to the correct port of the router which is labelled as “WAN”. Then check if you are connected either by using the Wi-Fi network or a LAN cable connected to a LAN-labelled port of the router.6. How to reset ClearAccess router login password?
Resetting the admin password of most ClearAccess routers is simple and requires pushing a reset button, located on the router itself, for 5 to 10 seconds.