Based on your local ip address, pick the correct IP address from the list above and click Admin. You should be redirected to your router admin interface.
Follow these instructions to login to your Fry's Electronics Router.
Connect router cable to your Laptop or Computer. Alternatively use your wireless network.
Recommendation - It's best to use a wired connection while setting up the Fry's Electronics router. This avoids the risk of suddenly being logged off when saving your changes.
Open your web browser of choice and type IP address of your Fry's Electronics router in the address bar. You can find the ip address on the back of your router.
Now enter the default username and password of your router by accessing the admin panel. If you don't have your username and password, you can try one of the default passwords for Fry's Electronics routers.
If you can’t log in to your router, then you are probably entering the wrong username or password. Remember to make a note of both after you've changed them.
The majority of the Fry's Electronics routers have a default username of admin and a default password of admin
The majority of the Fry's Electronics routers have the default password admin
The majority of the Fry's Electronics routers use 192.168.0.1 as the default IP address
First, type the router’s IP address in your browser address bar, Then, enter your router username and password, and then click OK or LOGIN.
Above, you can find the most probable default credentials.
First check if the WAN cable is connected to the correct port of the router which is labelled as “WAN”. Then check if you are connected either by using the Wi-Fi network or a LAN cable connected to a LAN-labelled port of the router.
Resetting the admin password of most Fry's Electronics routers is simple and requires pushing a reset button, located on the router itself, for 5 to 10 seconds.