192.168.0.10 - Login Admin

192.168.0.10 IP Address

To access the admin page type 192.168.0.10 into your web browser's address bar or click on the link below.

Based on your local ip address, this should be your router admin ip address. This is only the case if you are in the same network as your wifi router.

How to login to 192.168.0.10

Follow these simple steps to log into your Router with a 192.168.0.10 ip address.

  1. Connect router cable to your computer. (You can also use a wireless network). Double-check the device that you wish work on is connected to the wi-fi.

    Pro Tip - It's a good idea to use a wired connection while making any changes. This avoids the risk of suddenly being logged off when you click the Save button.

  2. Open your chosen web browser and type the router's IP address in the address bar. You can find it on the back of your router packaging. If the address fails, you'll need to grab your router manual. The IP listed as Default Gateway is the correct one.

  3. It's time to enter the default username and password of your router by accessing the admin panel. You can try the login credentials given below. The default values for admin are:

    root | user | admin

    If none of the above are successful, type your router’s name into your browser to locate the default login username and password you need. You should be directed to the models' configuration page where the network and the router settings can be managed.

Troubleshooting 192.168.0.10

If you can’t log in to your router, then you are probably entering the wrong username or password. Also, remember to make a note of both after you've changed them.

  • Forgot Login Password? Try hard resetting your router login. To do this, press and hold the small black button found at the back your router for around 10 seconds. This will reset your router to the factory settings.
  • Router login page not loading? If the login page is not loading, make sure the device you are using is connected to the wi-fi. You will also need to check if the wrong router IP address is set as the default one.
  • Sometimes pages, may have issues loading, or problems with speed. In this case, your network is probably using a different IP address. If this occurs, consult our IP address router list, and locate the right address. If you need any help, check out our tutorial on how to find your router's IP address.

Brands using 192.168.0.10

FAQ IP adddress

1. What is 192.168 l 0.10?

192.168.0.10 is a default IP address. The IP address always contains 4 sets of numbers ranging between 0 and 255. This is because each device connected to the internet is supposed to have a unique address. So, the first three sets are the network id, and the last set is the device id. In 192.168.0.10 the network id is 192 and the device id is 168.0.10

2. How to log in to 192.168 l 0.10 / How to login into 192.168 l 0.10 / How to use 192.168 l 0.10

First, type 192.168.0.10 in your browser’s address bar. Then, enter username and password, and then click OK or Login.

3. What are the (most common) default logins for 192.168 l 0.10?

The most common default logins for 192.168.0.10 IP address are Username: admin, Password: admin

4. What is the (most common) default username for 192.168 l 0.10?

The most common default username for 192.168.0.10 address is admin

5. What is the (most common) default password for 192.168 l 0.10?

The most common default password for 192.168.0.10 address is admin

6. 192.168 l 0.10 - How to Access Router IP Address?

First, type 192.168.0.10 in your browser’s address bar, Then, enter your username and password, and then click OK or LOGIN.
The most common default logins to access 192.168.0.10 are - username: admin, password: admin

7. How to login into 192.168 l 0.10 / Hot to go to 192.168 l 0.10 / How to use 192.168 l 0.10

First, type 192.168.0.10 in your browser’s address bar, Then, enter your username and password, and then click OK or LOGIN.
The most common default logins to access 192.168.0.10 are - username: admin, password: admin