Based on your local ip address, pick the correct IP address from the list above and click Admin. You should be redirected to your router admin interface.
Follow these instructions to login to your Altice Labs Router
.
Connect router cable to your Laptop or Computer. Alternatively use your wireless network.
Recommendation - It's best to use a wired connection while setting up the Altice Labs router. This avoids the risk of suddenly being logged off when saving your changes.
Open your web browser of choice and type IP address of your Altice Labs router in the address bar. You can find the ip address on the back of your router.
Now enter the default username and password of your router by accessing the admin panel. If you don't have your username and password, you can try one of the default passwords for Altice Labs routers.
If you can’t log in to your router, then you are probably entering the wrong username or password. Remember to make a note of both after you've changed them.
1. What is the username and password of Altice Labs routers?
The majority of the Altice Labs routers have a default username of admin and a default password of admin2. What is the default password of a Altice Labs router?
The majority of the Altice Labs routers have the default password admin3. What is the default IP of a Altice Labs router?
The majority of the Altice Labs routers use 192.168.1.1 as the default IP address4. How to log in to a Altice Labs router?
First, type the router’s IP address in your browser address bar, Then, enter your router username and password, and then click OK or LOGIN.5. How to troubleshoot a Altice Labs router?
First check if the WAN cable is connected to the correct port of the router which is labelled as “WAN”. Then check if you are connected either by using the Wi-Fi network or a LAN cable connected to a LAN-labelled port of the router.6. How to reset Altice Labs router login password?
Resetting the admin password of most Altice Labs routers is simple and requires pushing a reset button, located on the router itself, for 5 to 10 seconds.