Humax Default Login - Username, Password and IP Address

Default IP for Humax

Based on your local ip address, pick the correct IP address from the list above and click Admin. You should be redirected to your router admin interface.

Default logins for Humax

100 %
IP Address:
-
Username:
-
Password:
admin

Humax Router Login

Follow these instructions to login to your Humax Router.

  1. Connect router cable to your Laptop or Computer. Alternatively use your wireless network.

    Recommendation - It's best to use a wired connection while setting up the Humax router. This avoids the risk of suddenly being logged off when saving your changes.

  2. Open your web browser of choice and type IP address of your Humax router in the address bar. You can find the ip address on the back of your router.

  3. Now enter the default username and password of your router by accessing the admin panel. If you don't have your username and password, you can try one of the default passwords for Humax routers.

Humax Routers Help

If you can’t log in to your router, then you are probably entering the wrong username or password. Remember to make a note of both after you've changed them.

  • Forgot Login Password? Try hard resetting your router login. To do this, press and hold the small black button found at the back your router for around 10 seconds. This will reset your router to the factory settings.
  • Router login page not loading? If the login page is not loading, make sure the device you are using is connected to the wi-fi. You will also need to check if the wrong router IP address is set as the default one.
  • Sometimes pages, may have issues loading, or problems with speed. In this case, your network is probably using a different IP address. If this occurs, consult our IP address router list, and locate the right address. If you need any help, check out our tutorial on how to find your router's IP address.