Netgear - R7800-100NAS (v2)(''Nighthawk X4S'') Router Login - Username, Password and IP Address

Router Model: R7800-100NAS (v2)(''Nighthawk X4S'')

  • Username: admin
  • Password: password
  • IP Address: www.routerlogin.net Login
  • SSID: -

Default IP for R7800-100NAS (v2)(''Nighthawk X4S'')

Based on your local ip address, pick the correct IP address from the list above and click Admin. You should be redirected to your router admin interface.

Default logins for Netgear

98 %
IP Address:
192.168.1.1
Username:
admin
Password:
password
1 %
IP Address:
10.0.0.138
Username:
admin
Password:
admin
0 %
IP Address:
192.168.0.1
Username:
superuser
Password:
password
0 %
IP Address:
192.168.0.1
Username:
admin
Password:
1234

Netgear R7800-100NAS (v2)(''Nighthawk X4S'') Router Login

To Login as Admin at Netgear R7800-100NAS (v2)(''Nighthawk X4S'') Router use the guide below.

  1. Connect your PC or Laptop via cable to your router. Or instead use your wireless network.

    Suggestion - It is recommended for the connection to be done by using a cable attached to the Netgear R7800-100NAS (v2)(''Nighthawk X4S'') router. That will prevent you from losing connection in the middle of the configuration / setup process.

  2. By using a web browser of your choice and entering the IP address of your R7800-100NAS (v2)(''Nighthawk X4S'') router in the address bar you will load the login screen. You can find the ip address on the back of your router.

  3. Now enter the default username and password of your router and you will be granted access to its admin panel. If you do not happen to know what the username and password is then feel free to lookup some of the default ones for R7800-100NAS (v2)(''Nighthawk X4S'') routers by Netgear.

Netgear R7800-100NAS (v2)(''Nighthawk X4S'') Routers Support

If you experience problems logging in a R7800-100NAS (v2)(''Nighthawk X4S'') router, then you are probably using the wrong username or password. Do not forget to store the login details after you have reset them.

  • Forgot Login Password? Try the hard reset function. In order to do this, press and hold the small black button usually situated at the back your router case for approximately 10 seconds. Doing so will reset your router to the factory settings.
  • Router login page not loading? If for some reason the admin webpage fails to load, then check if the device you are using is connected to the wi-fi. You can also lookup what exact IP address has been set as default for the router.
  • In many cases problems related to loading the login screen of the router are related to it having a different IP from the one tried to be loaded. In this case, your network is most certainly using a different IP address. If that is the case, review our IP address router list, and find the right address. If you need any help, check out our tutorial on how to find your router's IP address.