spectrum Default Login - Username, Password and IP Address

Default IP for spectrum

Based on your local ip address, pick the correct IP address from the list above and click Admin. You should be redirected to your router admin interface.

Spectrum Router Login – How To Guide

Once in a while, you might come across a situation requiring you to log in to Spectrum router. Some of the cases that require logging into your Spectrum router might be:

  • changing your network's SSID name,
  • updating the password,
  • checking to see whether your router is capable of parental controls
  • editing the router's security setting

Spectrum was launched in 2014, a trade name of Charter Communications. Since then, it has spread over 100 million coverage in 42 states, making it the second largest Internet service provider in the US. It has one of the most reliable and fastest connections, but you need an efficient router to maximize its full potential.

This guide teaches you to tackle your Spectrum router issues with total ease.

Spectrum Router Setup Steps

Before we dive into the technicalities of the login process, a few steps require attention to make the login process much more manageable. 

The steps for setting up a Spectrum router are as follows:

  • Connect the modem to the cable outlet through a coaxial cable.

  • Plug the A/C power cable with the modem to start the device.

  • Use an Ethernet cable to connect modem with router.

  • Connect the router to the power cable and activating the device

  • When the light begins flashing, wait for 10 minutes for the light to become stable.

  • Connect your wireless device with an internet-enabled device using the default SSID and password.

  • Activate the Spectrum internet service.

  • Create a Spectrum account to start using your service.

Spectrum Router Login Steps

Below is a step-by-step guide on how to easily navigate your Spectrum router login process.

  1. Establish Connection With The Internet

    The first and foremost thing you will need is an Internet connection. Your wireless device must be connected to the Internet through Spectrum Wi-Fi. Here, you need to ensure that you connect using the Spectrum-issued credentials, usually printed on a tag at the rear end of the Spectrum equipment.

  2. Logging in to Your Spectrum Router with IP via Browser

    Now all you need to do is open the browser and, in the search bar, write Spectrum router's IP address. In case you don't remember your Spectrum router's IP address, fear not; check your router's backside. Usually, Spectrum routers have IP addresses printed there. Still having difficulties finding the IP address, we are at the rescue.

    You can try any of the following addresses:

    http://192.168.1.1/

    http://192.168.0.1/

    For some routers, you would also need to open http://www.routerlogin.net/. First-time users could enter their standard credentials, and after logging in, you can change the settings and credentials to make it harder for hackers to hack.

  3. Enter Router's Credentials

    Every Spectrum router has a standard username and password; one must enter these credentials to gain access for their first use. The standard username and passwords are in the format of, and we are sure one of them will work, so don't forget to try them:

    Username: "admin"

    Password: "password"

    Or 

    Username: "user"

    Password: "user"

    Or

    Username: "admin"

    Password: "admin"

Standard Spectrum Routers Default Login Credentials by Router Brand/Model

Askey Router

  • Default IP Address: http://192.168.1.1
  • Default Username: admin
  • Default Password: admin

Sagemcom Router

  • Default IP Address: http://192.168.1.1
  • Default Username: admin
  • Default Password: admin

Netgear Router

  • Default IP Address: http://routerlogin.net, http://192.168.0.1
  • Default Username: admin
  • Default Password: password

Arris TG16722G Router

  • Default IP Address: http://192.168.0.1
  • Default Username: admin
  • Default Password: admin

Netgear 3800 Router

  • Default IP Address: http://routerlogin.net
  • Default Username: admin
  • Default Password: password

Sagemcom 5260 Router

  • Default IP Address: http://192.168.1.1
  • Default Username: admin
  • Default Password: admin

Netgear 6300 Router

  • Default IP Address: http://routerlogin.net
  • Default Username: admin
  • Default Password: password

Ubee DVW32CB Router

  • Default IP Address: http://192.168.0.1
  • Default Username: admin
  • Default Password: Printed on the device label

Technicolor TC8717T

  • Default IP Address: http://192.168.0.1
  • Default Username: admin
  • Default Password: password

SMC

  • Default IP Address: http://192.168.0.1
  • Default Username: cusadmin
  • Default Password: password

Now, when you have logged into your Spectrum router, your browser will show its web interface. You will gain access to various menus, features, and other settings allowing you to change your Spectrum router's settings such as updating SSID, monitoring bandwidth connectivity, creating priority settings, and so much more. 

Ultimately, having access to your Spectrum router enhances your control of Internet speed and online experiences. Not only this, you gain control to choose your preferences and how your in-home Spectrum Wi-Fi network should work, giving you optimal results. 

Models using spectrum